Honda S2000 Front HALO Dimpled and Grooved Brake Discs Set with EBC Yellowstuff Pads - Performance Upgrade - Fast Road Brake Set up - Direct Replacement
- Performance Brake Discs
- Supplied as a Pair
- No Modification Required
- Aftermarket Upgrade
HALO Dimpled and Grooved Performance Brake Discs These are a firm favourite for many of our customers with the classic drilled and grooved appearance, but without the pitfalls of having a through drilled disc or more commonly described as cross drilled disc. Cross drilled discs allow channelling of hot gasses into the tunnel section of the brake discs in aid to assist the cooling of the discs, however for most brake discs this has a serious flaw resulting in hot spot surrounding the holes often resulting in cracking originating from the holes.
Halo dimpled and grooved brake discs overcome this problem and offer additional reliability over cross drilled discs, the dimples work in much of the same way allow gasses to sink into the small pockets and immediately escaping once the pocket has passed the pad surface, the grooves also carry out the same task but also help to de-glaze your brake pads and assist with parallel brake pad wear. As our stock is cycled the discs supplied may or may not have a anti-corrosion coating around the hub area, some discs may even be Geomet coated depending on the specific application, if this is important to you please check with us before purchasing.EBC Yellowstuff Performance Brake Pads EBC yellows are ECE Brake safety tested which means they must work perfectly from cold at least as good or better than stock pads. When Yellowstuff see some heat (which is not tested for in the ECE R 90 brake safety regulations) they really show their pedigree.
On Japanese cars built with lower friction FF-rated pads these deliver a full grade higher stopping and on German cars built with GG these are about the only aftermarket pads that will match or beat the pretty good German OE spec pads and that takes some doing. High-efficiency performance pad for high friction and improved stopping power. Not only a high friction pad but very resistant to heat and lots of heavy braking means that Yellowstuff has been used with great success in fast street cars and Police vehicle brakes alike. EBC Yellowstuff was upgraded during 2021 to remove copper from the mix to comply with environmental legislations and as the new mix lasts longer it is not now being suggested as a track material due to the longer bedding in process required. On the street, bedding happens naturally in the first 100-200 miles of urban use but for those drivers wishing to arrive at the track with new pads and enjoy their day, our current suggestion is to use the Bluestuff formulation for track day driving both front and rear. Because of its huge heat range, the applications where EBC Yellowstuff will deliver benefits range from fastest street use on higher horsepower cars on most street-based cars and even as a brake upgrade on Trucks and SUV.
Yellowstuff is especially appreciated on Trucks for towing and heavy loads and where wheel and tire oversize upgrades have been fitted. In trackday/drift/hillclimb races where earlier Yellow blends were suggested – EBC Bluestuff NDX or the RPX ranges are now the better choices, please contact us so we may provide you with the RP range of pad listings.