Honda Integra Type R DC2 Rear Sport Grooved Brake Discs

£140.34

Available on back-order

SKU: BD4985 Category:

Description

- Fits Integra Type R 1.8 DC2 1998-2001 - Performance Brake Discs - Supplied as a Pair - No Modification Required - Aftermarket Upgrade Halo 12G Performance Brake Discs enhance your braking and are considered our entry level upgrade for most drivers. Each rotor has 6 slots per side to allow ample degassing whilst keeping brake noise to a minimum, these can be used for family saloons and everyday hot hatches. Brake pad wear is comparable to standard brake discs and as such can be used with all original equipment brake pads and after market brake pads without any problems. Road and Track Use HALO brake discs perform on the road and on the track but as you can imagine the temperatures achieved on the track are usually much higher than seen under normal road use, if using ...

  • Fits Integra Type R 1.8 DC2 1998-2001
  • Performance Brake Discs
  • Supplied as a Pair
  • No Modification Required
  • Aftermarket Upgrade
  • Halo 12G Performance Brake Discs enhance your braking and are considered our entry level upgrade for most drivers. Each rotor has 6 slots per side to allow ample degassing whilst keeping brake noise to a minimum, these can be used for family saloons and everyday hot hatches. Brake pad wear is comparable to standard brake discs and as such can be used with all original equipment brake pads and after market brake pads without any problems.

    Road and Track Use

    HALO brake discs perform on the road and on the track but as you can imagine the temperatures achieved on the track are usually much higher than seen under normal road use, if using on the track its important that extra care is taken during fitment and post fitment.

  • Ensure the hubs are cleaned before fitment
  • Ensure there is no excess free play in wheel bearings
  • Ensure the brake discs are running true before use by measuring run-out
  • Ensure the brake caliper pistons and slides are move freely checking slides for wear
  • Ensure tightening torques are adhered too
  • Post Fitment

    After fitment and road testing re-check the wheel torque, this is especially important when using on track use after several laps, as the heat absorbed by the brake discs will transmit through to the wheel hub and wheel, this causes your components to expand and may lead to reduced wheel tightening torque. This will lead to brake vibrations when braking and may permanently damage your brake discs and ruin your track day enjoyment. Please note however we do not offer warranty for use on track.

    Additional information

    Brand

    HALO Performance

    Placement on Car

    Rear